| Model No. |
CZ1204-  :P=with PFC ,N=without PFC :E=EU
AC plug,U=US AC plug,K=UK AC plug ,A=Australia AC plug. |
| Output |
Charge Voltage |
14.4Vdc+/-2% @ normal mode
13.7Vdc+/-2% @ floating mode
14.7Vdc+/-2% @ snow mode (when temperature under 0 °C
and AGM batteries use only) |
| Charge Current Range |
0.8A~1.2A@ Motorcycle mode Selection by mode switch.
1.8A ~2.2A@ Car mode Selection by mode switch.
3.7A~4.3A@ Truck/Van mode Selection by mode switch. |
| Rated Maximum Power |
58W |
| Ripple & Noise (max) |
150mV |
| Efficiency |
81% |
| Battery Draining Current |
<0.2mA |
| Voltage Tolerance |
±2% |
| 6 Charge steps |
Step1 |
Desulphation:Desulphation will pulse and revive sulphated batteries. |
| Step2 |
Soft start:the charging current is limited for checking the situation and features of batteries. |
| Step3 |
Bulk:main charging step provides most of current to speed up the charging. |
| Step4 |
Absorption:terminal voltage maintains at original level and current drops after battery charged full. |
| Step5 |
Analysis:charger tests the charging situation of charged batteries. |
| Step6 |
Float:maintains a charged battery. |
| Input |
Input Voltage range |
90~130 (US type), 170V~260V(EU type) |
| Input frequency range |
47~63Hz |
| Input current rating |
1.3A@110VAC / 0.7A@230VAC |
| Power Factor Correction |
PFC >0.95.(Optional) |
| Leakage Current |
<1mA / 240 Vac |
| Protections |
Polarity Reverse |
YES.(NO Charge till fault has removed) |
| Disconnect |
YES.(NO Charge and sparks when clips disconnect or short) |
| Over Temperature |
Charger recovers aotomatically after fault condition has removed. |
| Short Circuit |
YES.(NO Charge till fault has removed) |
| Wrong Battery Protection |
YES.(No Charge When Vbat<2v or Vbat>15.5v) |
| Environment |
Operating Temperature |
-20~50°C .Output power is reduced automatically at higher temperature. |
| Operating Humidity |
10~95% RH. |
| Vibration |
10~500HZ,2G/P-P,3 axes,15min sweep without malfunction. |
| Shock |
20G/Package |
Smart 6 charge steps
