 April 28, 2025 - Taipei, Taiwan – GlacialPower, the power division of LED technology manufacturer GlacialTech Inc., proudly introduces the GP-CCP010P-42CD-TA1, a new Terminal Blocks DALI-2 and PUSH dimming, 10W constant current LED driver. Designed for optimal efficiency and flexibility, this driver offers exceptional power factor correction (PFC) and energy-saving features, making it an excellent choice for modern lighting applications.
At full load, the GP-CCP010P DALI-2 LED driver delivers an active power factor correction greater than 0.98 at 115Vac and over 0.93 at 230Vac. The driver supports a wide range of DC output constant current options, including 400mA, 350mA, 300mA, 250mA, 200mA, 150mA and 100mA, selectable via DIP switch, providing compatibility with various lighting fixtures.
Supporting a universal AC input range of 90 to 264Vac, the GP-CCP010P DALI-2 LED driver is equipped with robust protection features, including overload protection (OLP) and short circuit protection (SCP), ensuring long-term reliability and safety. Its fully isolated case design enables an extended operating temperature range from -30°C to 55°C (at full load), making it suitable for diverse environments. With no-load and standby power consumption of less than 0.5W, it ensures minimal energy wastage, contributing to environmental sustainability by reducing energy consumption and carbon footprint.
One of its standout features is its intelligent  dimming functionality. The GP-CCP010P DALI-2 LED driver supports both DALI or PUSH dimming functions based on the wiring configuration. This smart detection capability enhances user convenience and simplifies installation.
Measuring only 135 x 30 x 20mm, the GP-CCP010P DALI-2 LED driver offers a compact form factor, allowing for versatile installation across a wide range of lighting applications. With its high efficiency, intelligent dimming, and robust protection features, this driver is an ideal solution for modern lighting systems that demand reliability, flexibility, and energy efficiency.
For more information about the GP-CCP010P-42CD-TA1 DALI-2 LED driver, please visit GlacialPower’s website or contact our sales team.
|
| Model No. |
GP‐CCP010P‐42CD-TA1 |
| Output |
DC Voltage |
42V |
| Constant Current Region |
10 ~ 42V |
10 ~ 42V |
10 ~ 42V |
10 ~ 40V |
10 ~ 33V |
10 ~ 28V |
10 ~ 25V |
| Rated Current |
100mA |
150mA |
200mA |
250mA |
300mA |
350mA |
400mA |
| Rated Power |
4.2W |
6.3W |
8.4W |
10W |
9.9W |
9.8W |
10W |
| Ripple & Noise (Max.) |
50mV |
| Efficiency (Typ.) |
83% at 230VAC full load |
| Current Tolerance |
±5% |
| Current Ripple (Max.) |
20mA |
| Set up Time (Max) |
< 0.7 sec at 230VAC full load |
| Input |
Rated Voltage |
100~ 240VAC 141~340VDC |
| Voltage Range |
90 ~ 264VAC |
| Frequency Range |
47 Hz ~ 63 Hz |
| AC Current (Typ.) |
0.12A at 115VAC,0.06A at 230VAC |
| Power Factor |
>0.98 at 115VAC, >0.93 at 230VAC at full load |
| Total Harmonic Distortion |
THD<10% at 230VAC full load |
| No-load Power Consumption |
Pno<0.5W @ 230VAC |
| Standby Power Consumption |
Psb<0.5W @ 230VAC (DIM to OFF) |
| Inrush Current (Typ.) |
Cold Start 3.6A (Td=27us measured at 50% Ipeak) at 230VAC |
Max. Number of PSUs
on Circuit Breaker |
B type : 50units (10A) / 80 units (16A) / 125 units (25A),
C type : 58 units (10A) / 93 units (16A) / 145 units (25A),
D type : 106 units (16A) / 166 units (25A) at 230VAC |
| Leakage Current(Typ.) |
<0.5mA / 240VAC |
DIM. Control
(DALI-2) |
DALI standards |
Comply with IEC62386-101 ed2, 102 ed2, 207 ed2, Device Type 6 (DT6) |
DALI bus current
consumption |
< 2.0mA |
DIM. Control
(PUSH DIM) |
AC PUSH dimming |
work for AC voltage input only, refer to the wiring diagram of PUSH DIM |
| Others |
MTBF |
20K hours min.MIL-HDBK-217F(25°C) |
| Dimension(L x W x H) |
135 x 30 x 20mm ; 70g/Pcs |
|
Universal AC input 90~264VAC.
